RS86/RS87 VHF
50
E04819 Issue 1.0
4.4 Viewing the call log
The call log records details of the last 20 DSC or telephone calls
received, including the date and time, the type of call, and the
caller ID. There are two separate logs: one for standard calls,
the other for distress calls.
Note All calls are logged, even those rejected by pressing ON/C.
Press M
SG
to enter the Call Log menu. If the call logs are
empty, the display will show “NO CALLS RECEIVED” before
returning to the default display.
Press the C
ALL
and MSG
keys to switch between the stan-
dard call log (indicated by “1” shown next to the large digits)
and the distress call log (indicated by “2” shown next to the
large digits).
Press V
OL ▲ or VOL ▼ to scroll through the log entries – the
display will show the call type and the date/time the call was re-
ceived (Fig 4.19). The small digit shows the log type (“1”- stan-
dard call log; “2”- distress call log) and the large digits show the
entry number; the first entry shown is the most recent call.
1
03
I ND I V I DUAL
1 9- 1 2 1 452
MSG
INT
Fig 4.19 - Viewing a call log entry
Note The date and time displayed use the date/time data received
from the navigational receiver interfaced to the radio, not from
the incoming message. If a navigational receiver was not con-
nected to the radio at the time the message was received, the
date and time will not be displayed.
Press O
K to view the details of the selected call – the display
will show the caller’s number (or the name, if the number is
stored in the directory).
To Next Page
Loading...
Need help?
General
