3.2 Numbers
The Numbers menu is used for entering ID numbers such as
MMSI, Group MMSI and ATIS (if applicable in country of use).
Once the Numbers menu option has been selected (see intro-
duction to section 3), use the VOL and VOL keys to scroll
through the menu options -
Ship’s MMSI (section 3.2.1)
ATIS Number (section 3.2.2)
Group MMSI (section 3.2.3)
NOTE The ATIS Number option will only be shown if the radio is
ATIS enabled. This feature is only available for sets used in
Benelux and the Rhine/Danube waterways.
To select an option, press Ok.
To return to the main menu, press On/C.
3.2.1 Ship’s MMSI
Ship’s MMSI will display the boat’s MMSI number if it has
already been entered, or will allow the MMSI to be entered if
the radio is being used for the first time.
From the Numbers menu (section 3.2) select Ship’s MMSI and
press Ok - the display will show “Ships MMSI” and the MMSI
number (unless the number has not been entered yet, in which
case it will show “_ _ _ _ _ _ _ _ _” - Fig 3.6).
RS87 VHF
24
Part No. E04297
SH I PS MMS Ii
------------
INT
16
Fig 3.6 - Entering MMSI Number
CAUTION The MMSI number can only be entered once and cannot be
edited by the user. If it is necessary to change the MMSI (for
example if the radio is being moved to another boat), the radio
must be sent to an authorised Simrad service agent for repro-
gramming.
To Next Page
Loading...
Need help?
General