To Next Page

To Previous Page

Press Ok again to automatically switch to the working

channel.

4.3.5 Group call

If the radio has a Group MMSI number entered (see section

3.2.3) and a Group call is received, the radio will sound an

incoming call alarm.

The display will ﬂash between displaying “Routine Group

Call” + the caller’s MMSI and the speciﬁed working channel

(Fig 4.13). If the caller’s MMSI is stored in the MMSI directory

(see section 5.2), then the display will show the name stored

instead of the MMSI number.

RS87 VHF

Part No. E04297

ROUT I NESS

GROUP CALL

INT

FROMPRAY 0

3895623970

Fig 4.13 - Incoming Group call

Fig 4.14 - Working channel speciﬁed by incoming Group call

Press Ok to accept the call - the display will change to “Reply

On Ch X” (Fig 4.14), where X is the speciﬁed working channel,

or On/C to reject the call.

REPLY ONAA

CH 1 0BBBBB

INT

Simrad RS87 Instruction Manual

Other manuals for Simrad RS87