Press the VOL or VOL key to select another VHF items
menu option, or On/C to return to the main menu.
3.3 VHF items
The VHF items menu contains the settings for miscellaneous
items such as user channel
, position view, auxiliary audio and
speaker settings amongst others.
Once the VHF items menu option has been selected (see intro-
duction to section 3), use the VOL and VOL keys to scroll
through the menu options -
User channel (section 3.3.1)
Position view (section 3.3.2)
Last used channel (section 3.3.3)
Interrupt intercom (section 3.3.4)
Auxiliary audio (section 3.3.5)
Speaker settings (section 3.3.6)
Scrambler codes (only if scrambler option is fitted)
Serial number
To select an option, press Ok.
To return to the main menu, press On/C.
3.3.1 User channel
This is a user programmable priority channel that is used in the
Tri-watch function and is selected by pressing the User key.
From the VHF items menu (section 3.2) select User Channel
and press Ok - the display will show “User Channel”.
Enter the channel number using the numeric keypad and press
Ok. The display will show “Set User Channel” (Fig 3.8) -
Instruction Manual
27
Part No. E04297
10
SET USERAA
CHANNELBBB
INT
Fig 3.8 - Setting the User Channel
To Next Page
Loading...
Need help?
General