4.3.6 Distress Alert call
If a Distress Alert call is received, the radio will sound an
incoming call alarm.
The display will flash between displaying “Distress Alert” and
the caller’s MMSI along with the nature of the distress alert.
If the caller’s MMSI is stored in the MMSI directory (see section
5.2), then the display will show the name stored instead of the
MMSI number (Fig 4.15) -
Instruction Manual
41
Part No. E04297
06
D I STRESS S
ALERT CALL
INT
S I NK I NG 0
3453428599
Fig 4.15 - Incoming Distress Alert call
Press Ok to accept the call and automatically switch to channel
16, or On/C to reject the call.
The full details of the Distress Alert may be viewed in the log
(see section 4.4).
NOTE Distress Alert calls always use channel 16 as the working
channel.
To Next Page
Loading...
Need help?
General