Press Ok to accept the call and automatically switch to channel
16, or On/C to reject the call.
NOTE All Ships Urgency calls always use channel 16 as the working
channel.
4.3.3 All Ships Safety call
If an All Ships Safety call is received, the radio will sound an
incoming call alarm.
The display will flash between displaying “All Ships Safety”
and the caller’s MMSI. If the caller’s MMSI is stored in the
MMSI directory (see section 5.2), then the display will show the
name stored instead of the MMSI number.
Press Ok to accept the call - the display will change to “Reply
On Ch X”, where X is the specified working channel, or On/C
to reject the call.
Press Ok again to automatically switch to the working channel.
4.3.4 All Ships Urgency call
If an All Ships Urgency call is received, the radio will sound an
incoming call alarm.
The display will flash between displaying “All Ships Urgency”
and the caller’s MMSI. If the caller’s MMSI is stored in the
MMSI directory (see section 5.2), then the display will show the
name stored instead of the MMSI number (Fig 4.12) -
Instruction Manual
39
Part No. E04297
10
ALL SHIPSSS
URGENCY9 9
INT
FROMPRAY 0
SEASPRAY 0
Fig 4.12 - Incoming All Ships Urgency call
To Next Page
Loading...
Need help?
General