Use the numeric keypad to enter the number (Fig 5.3). Press the
Call and MSG keys to move the cursor to correct any errors.
The cursor position is indicated by the number flashing - enter a
new number to overwrite the incorrect number.
5.3 Entering a number
Press Ok to begin entering a new number - the large digits will
show the entry number in the directory (1 if it is the first entry).
Enter the name first - use the VOL or VOL keys to scroll
through the alphabetical characters and the numeric keypad to
enter any numbers (Fig 5.2)
Press MSG to move the cursor forward, or Call to move
back and correct any errors (The cursor position is indicated by
the character flashing - enter a new character to overwrite).
Press Ok to confirm the entry and move on to the MMSI entry.
Instruction Manual
47
Part No. E04297
1 0 1
SEASP-----
----------
DIR
INT
Fig 5.2 - Entering a new name into the directory
1 0 1
SEASPRAY 0
47539-----
DIR
INT
Fig 5.3 - Entering the number
Press Ok to confirm and store the entry to the directory.
Press On/C at any time to abort to the default display.
NOTE If using the Boat or Coast Station directories the entry will not
be accepted unless all nine digits of the MMSI number have
been entered.
To Next Page
Loading...
Need help?
General