Sinar Technology 6070-BeanPro User Manual

USER GUIDE
Book 1.
(Modes 0 to 1b).
Sinar Technology BeanPro Moisture Analyser.
Model 6070-BeanPro.
DOC No: 6070-BeanPro
DATE 08-06-12
ISS 2
For use with V7.7 software.
Sinar Technology
Unit 4-5 Camberley Business Centre, Bracebridge, Camberley, Surrey,
England GU15 3DP.
Tel +44 (0)208 328 0727 Fax +44 (0)1276 29941

Sinar Technology 6070-BeanPro Specifications

General

Brand	Sinar Technology
Model	6070-BeanPro
Category	Measuring Instruments
Language	English

Summary

6070 BeanPro Display and Keypad Layout

Key Pad Functions Explained

Explains the function of each key: F1, MODE, CLEAR, ENTER for instrument operation.

Mode 1b Display Description

Set Bias Value (F1)

Used to alter the displayed moisture reading for a specific crop calibration.

System Power Up Procedures

First Power Up

Describes how to power up the BeanPro for the first time using the 'I' key.

Ongoing Power Up

Explains that the BeanPro remembers the last selected crop calibration on power up.

Measuring Cell Handling Warning

Critical warning about handling the measuring cell during operation (anti-clockwise rotation).

Loading the Sample

Sample Loading Method

Step-by-step instructions for filling the beaker and loading the sample.

Taking a Measurement (Mode 0, F4)

Initiate Measurement

Measurement Process Display

Repeat Measurement Procedure

Appendix 1: Battery Replacement

Battery Low Indicator

Describes the warning signal when batteries begin to fail.

Battery Replacement Procedure

Step-by-step instructions for replacing batteries, emphasizing correct polarity.

Appendix 2: Technical Specifications

Appendix 3: Error Code Summary

Error Code Overview

Lists error codes, explanations, and recommended actions for troubleshooting.