8.0 Loading the sample.
The BeanPro is supplied with –
1off Loading Hopper
1off Beaker
1off Strike off blade
We strongly recommend the use of all of the above items to achieve the maximum
accuracy from your machine.
Method:
Over fill the beaker with sample.
Strike off flush using the stainless steel wiper provided.
Place the closed loading hopper on the 3 support posts around the measuring bowl.
Pour the sample from the beaker into the loading hopper.
Steady the hopper with one hand and give an upwards tap to the slider with the
other. The slider will snap open dropping the sample into the measuring bowl.
Remove the hopper from the machine.
To Next Page
Loading...