APPENDIX 1
REPLACEMENT OF BATTERIES
Battery Low indicator
Should the batteries begin to fail, a warning signal will appear when the instrument is
switched on.
* * * W A R N I N G ! * * *
B a t t e r y L o w ! ! !
To replace the batteries:
- remove the sample cell from the instrument.
- unscrew the battery cover from the underside of the instrument.
- remove the old batteries and replace with four standard 1.5V
alkaline batteries (Size C, MN 1400 or equivalent).
BE SURE TO INSERT BATTERIES THE CORRECT WAY ROUND - AS MARKED
IN BATTERY BOX - replace the battery cover and screw into position.
Important! Always use alkaline batteries. If you are not going to use the moisture
analyzer for some time, remove the batteries from the instrument.
If the optional (factory fitted) 1900-6358 12v Power Kit is fitted the correct DC
voltage to operate the FP is provided from a 115v to 240v Power supply.
To Next Page
Loading...