178
General Service
General service
Snapshot version
This shows the information on the firmware version implemented in the current machine. .
e.g.) PINETREE_140109_2
SP Report
This is an adminstrative page of the collective data and service mode by Image Technology
Development Division, and shows history of the operation environment,
Margin/Magnification settings, Beam Power values and others.
- Job by modes (1,2,3,… pages): Number of print per each page no.
- Cartridge History (3K, 6K, 9K, 13K): Number of toner cartridge per each capacity
volume.
- Toner Cartridges (Oldest, Newest): Information on the installed Toner Cartridge
(only the latest 10 cartridges recorded)
- Printed by coverage (percent): Number of printed page per each toner coverage
- Free motor ON count: Motor rotation time (sec) excluding the starting motion time
- Margin Adjust : Device Margin adjustment value
- Magnification : Device Magnification adjustment value
- Beam Power Adjust : Device Beam Power adjustment value
System recovery
Recover the system S/W to the factory default version.
The software is recovered through 2~3 times rebooting/retrials based on the machine
status. If required, the latest firmware update can be implemented after the system
recovery is made.
To Next Page
