Sinfonia Technology C10-3VFEF User Manual

5
HTE302172 43/46
6
Name of Part
Model
Manufacture
On C10-controller On the Load
Plug connector (2P) CN-70-AJ-2P CN-70-P-2P SATO PARTS
Plug connector (3P) CN-70-AJ-3P CN-70-P-3P SATO PARTS
Fuse (F1)
C10-5VFEF: EWM 250V 5A
C10-3VFEF: EWM 250V 5A
C10-1VFEF: EWM 250V 3.15A
――――――
FUJI TERMINAL
INDUSTRY CO.,
LTD.
Fuse (F2)
EWM 250V 2A
（Synchronous power
output）
――――――
FUJI TERMINAL
INDUSTRY CO.,
LTD.
Accessory
AccessoryAccessory
Accessory
List
ListList
List
5
HTE302172 44/46
6
Model
C10-1VFEF
C10-3VFEF C10-5VFEF
Power Source AC200～230V±10% AC100～120V±10% 50／60Hz
Control Type PWM
Output
Voltage
0～190V（ Input power 200V system ） 0～95V（ Input power 100V system ）
When power source is AC 100V system the output voltage is 0 to 190V with an optional
transformer unit C10-TR.
Frequency
Half-wave ：45～90Hz
Full-wave ：90～180Hz
High-frequency ：180～360Hz
Middle-frequency ：65～120Hz
The maximum
current
1A 3A 5A
Operation
mode
Auto-tuning mode
The output drive frequency chases the resonant frequency of the drive unit
automatically and C10-controller controls the stroke constant.
Cons
tant stroke
mode
C10-controller controls the stroke constant at the preset drive frequency.
Constant voltage
mode
C10-controller outputs the constant voltage at the preset frequency
Additional
function
Speed change An external signal selects any stroke setting out of four preset values.
Run/Stop operation
An external signal runs or stops the partsfeeder.
Output signal
C10-controller
outputs a synchronous signal with running and stopping of the
partsfeeder.
Soft start Ramp-up time 0.2 to 4 seconds
On and Off delay Delay time 0.2 to 60 seconds
Power source for
sensors
With a 3 cored socket plug
Synchronous
power output
Function Power output synchronous with the partsfeeder operation
Control method Run/Stop with a triac
Output voltage Same as Power Sorce
Maximum current 2A
Applicable
condition
Ambient
temperature
0～40℃
Ambient moisture 10～90％（No condensation is allowed.）
Workable location
Indoor without corrosive gas and dust or harmful circumstance
Noise resistance 1000V or more
Color of case U75-70D（JAPAN PAINT MANUFACTURERS ASSOCIATION）
Outline
dimensions
59W×170H×150D
（without mass of plug connectors）
119W×170H×150D
（without mass of plug
connectors）
Mass 0.9Kg 1.0Kg 1.6Kg
Applicable
model
Partsfeeder
EA series：EA－15.20
ER series：ER－25
EA series：EA－25.30.38.45
ER series：ER－30.38.45
ER series：ER－55.65.75
Linear feeder
LFB series：LFB－300.400.550
LFG series：LFG－600.750.900
CF feeder
CF series:CF-1,2,3 CF series:CF-4
Specifications
SpecificationsSpecifications
Specifications

Sinfonia Technology C10-3VFEF Specifications

General

Brand	Sinfonia Technology
Model	C10-3VFEF
Category	Controller
Language	English