Singer 14SH644 - How to Sew a Rolled Hem

33
• This machine can sew four types of rolled hems.
• Rolled hemming is done by rolling and overedging
the fabric edge.
• Light weight fabrics such as lawn, voil, organdy,
crepe, etc. perform the best.
• Rolled hemming is not suited for heavy or stiff
fabrics.
• Remove the left needle.
• Move seam width finger knob to setting R . (See
page 27 )
• Align left face of seam width finger support plate
with R mark on throat plate by turning seam width
finger knob, as required.
• Set stitch length dial to “F ~ 2” and a fine seam will
be sewn.
• Needle: Singer Needle #2022 size 80/11 or 90/14
• Thread: A variety of thread combinations can be
used for rolled hemming.
22. HOW TO SEW A ROLLED HEM
Machine Set Up