Singer 14SH644 - Selection of Stitches

5
This machine is capable of producing various types of stitches according to the combination of needle positions,
threading methods, tension adjustment.
* Depending on the needle positions used, this machine can sew 3-thread standard width 3.5mm overedge and
a 5.7mm wide overedge seams.
1. Three-thread
Overlock
2. Three-thread
Flatlock
3. Three-thread
Wrapped Edge
Overlock
4. Four-thread
Stretch Mock
Safety Stitch
1-needle 3-thread stitch is used for
overedging and seaming on common
fabrics. Also, a 3.5mm and 5.7mm
overlock seam width can be obtained by
changing the needle position.*
1-needle 3-thread stitch is used for butted
or lapped seams and ornamental stitching
with decorative thread. Also, a 3.5mm
and 5.7mm flatlock width can be obtained
by changing the needle position.*
1-needle 3-thread stitch is used for sewing
narrow rolled hems or ornamental edges.
Also, a 3.5mm and 5.7mm wrapped
overlock seam width can be obtained by
changing the needle position.*
2-needle 4-thread stitch which is ideal for
medium to heavy weight stretchy fabrics
such as double knits and swim wear.
Reference
Pages
1. SELECTION OF STITCHES
Stitch Type
29
30
31
32
(504)
(505)
(514)