How to Replace a Sewing Machine On/Off Switch
This DIY repair guide explains how to replace the on/off switch on a sewing machine. The on/off
switch turns on the sewing machine's power and work light. If the work light won't come on with
a new bulb when you turn on the on/off switch, replace the switch with the manufacturer-
approved replacement part.
Use these steps to replace the on/off switch in common Kenmore and Brother sewing machines.
Time required:
Less than 30 min.
Part Required
• On/Off switch
Tool Required
• Phillips screwdriver
• Work gloves
Before you begin
Wear work gloves before you begin.
Instructions
Warning: Undertaking repairs to appliances can be hazardous. Use the proper tools and
safety equipment noted in the guide and follow all instructions. Do not proceed until you are
confident that you understand all of the steps and are capable of completing the repair. Some
repairs should only be performed by a qualified technician.
To Next Page
Loading...
