How to Replace a Sewing Machine Drive Belt
This DIY repair guide explains how to replace the drive belt in a sewing machine. The drive belt
connects the drive motor to the hand wheel and upper shaft, turning the hand wheel and upper
shaft as the motor runs. A broken or worn belt can't turn the hand wheel and upper shaft.
Replace a broken or worn sewing machine drive belt using the manufacturer-approved
replacement part.
Use this basic procedure to replace the drive belt in Kenmore and Brother sewing machines.
Time required:
Less than 15 min.
Parts Required
• Drive belt
Tools Required
• Work gloves
• Phillips screwdriver
To Next Page
Loading...
