22
MULTIPLE-HOOP EMBROIDERY
PSW 2.00a software provides you with the advantage of digitizing and writing a
Multiple-hoop design for the Quantum
®
XL-1000, Quantum
®
XL-5000 and
Quantum
®
XL-6000 Sewing Machines. Depending on which Multiple-hoop
setting is selected on the computer screen, PSW 2.00a will allow you to write a
design to the respective card as a Multiple-hoop design.
NOTE: The hoop size and sewing field size for the Quantum
®
XL-5000 and
Quantum
®
XL-6000 are identical, therefore you may use the Singer XL-5000
Multiple 250x450 hoop selections for both machines.
1. File: New.
2. Open Image dialog box: New.
3. New dialog box: Click the down-arrow. Select Singer XL-5000 Multiple
250x450; click OK.
4. From the Main Menu, click on Utilities: Hoop.
5. From the Hoop Frame box, select Singer XL-5000 Multiple 250x450;
Click OK.
6. From the Horizontal tool bar, click on Choices: Grid; Choice of 2 kinds of
grid points; Set the Point Distance for the X and Y at 400(mm); Click OK.
The Grid will aid in the placement of the design elements being arranged
on the screen.
7. From the Vertical tool bar, choose the Lettering icon.
8. In the Text Box, type WELCOME.
NOTE:
The Read/Create Hoop Frames dialog box allows you to select a hoop from the
program’s predefined hoop frames or enables you to create a new one. You can
create a custom hoop that is not among the predefined hoops in the program. If
you click on “New HOOP”, it will prompt you for the specific attributes of the
custom hoop. However, the Multiple-hoop function is only available for the
Quantum
®
XL-1000, Quantum
®
XL-5000, and Quantum
®
XL-6000.
Remember: Whichever hoop you choose (Quantum
®
XL-1000 or Quantum
®
XL-5000) will also determine which machine this multiple-hoop design is being
constructed for, as the software will allow you to save only to the card specified
for the selected machine.
To Next Page
Loading...