2
COMPUTER REQUIREMENTS
Type of PC: IBM compatible
Operating System: Windows 95, 98, 2000, NT, ME or XP
TUTORIAL
There are interactive Tutorials to promote easier learning available in four
languages: English, French, Spanish, and German.
1. From the Main Menu click on Help: Tutorial.
2. When the Tutorial screen appears, icons for five general categories will be
listed on the left: Input & Output data, Drawing Tools, Punching
(Digitizing) Tools, Editing Options, and General Functions.
3. Move mouse pointer over icons displayed on the left, to select a category.
4. Clicking on a category will then offer a choice of sub-categories.
5. Click a sub-category to access an interactive guide pertaining to that subject.
NOTE: To set the PSW 2.00a to read in another language:
a. Close the Tutorial
b. Go to Main Menu and select Parameters: System Parameters
c. Click the down-arrow to select new language, then click OK
d. The entire PSW 2.00a program will now display in the new language,
including the Tutorial
OPENING A SEWING FIELD AREA
1. File: New.
2. Open Image dialog box: New.
3. New dialog box; click the down-arrow; Select appropriate hoop size for
the machine being used; click OK.
NOTE: Before opening a sewing field area, the program can be set up to
work in Metric units (cm/mm) or in English units (inches).
• From Main Menu, select Parameters: System Parameters.
• Click the down-arrow to the right of Unit System, to select either
English
or Metric units; click OK.
To Next Page
Loading...