27
EDITING BASICS
1. File: New.
2. Open Image dialog box: New.
3. New dialog box: Click OK.
MOVE A DESIGN
1. From the Vertical tool bar, click on the Library icon.
2. From the Animals Category, click on #001 Lion, Click OK.
3. Click the right mouse to access the pop-up menu.
4. Click Finish to fill with stitches.
5. To move the design, go to Main Menu and choose Edit: Select.
6. From the Horizontal tool bar, click on Select All. Design is ready to move.
7. Click and drag the design into the new position.
8. Click the right mouse to access the pop-up menu. Click Finish to set the
stitches.
MODIFY A DESIGN
1. From the Main Menu, select Modify: Dimensions.
2. The Dimension text box appears.
3. The design is shown as a “white silhouette”.
4. X: and Y: represent the height and width in 1/10 mm and can be changed
by pressing the arrows or typing the number in the box.
NOTE: If desired, metric units can be changed to work in inches.
Click the units icon to access inches. Click on inches and the X: and
Y: numbers will change from metric to inches automatically.
5. The Lock icon maintains the ratio of the design. Clicking the Lock icon
allows working with X: and Y: independently.
To Next Page
Loading...