29
DELETING A STOP
1. To delete the added color stop.
2. From Main Menu click Edit: Stitch edit (Lower left corner s=1 flashing).
3. From Horizontal tool bar; click on Move to function and select STOP;
OK.
4. Click on Go to next function twice to get to added color stop.
(Lower left prompt line: f: stop, s = 1537).
5. Right click to access pop-up menu; click on Properties.
6. Change the Stitch code from Stop to Hit. Color stop is removed.
DELETING A SEGMENT
1. To delete a segment of the flower.
2. From the Main Menu, click Edit: Edit Outlines. Lower left corner:
(Eod = end of design).
3. Place the mouse pointer within the top petal; click the left mouse once to
show the outline of the selected petal block. Lower left corner give detail
about the block: Branches, Satin.
4. Click right mouse to access pop-up menu, then click left mouse on Delete
Block. Block is deleted.
COPYING A SEGMENT
1. From the Main Menu, click on Edit: Edit Outlines.
2. Click on the block to be copied; reference points appear around the block.
3. Click the right mouse to access pop-up menu, click left mouse on Select.
Highlighted block now appears in black with a box frame around it.
4. Click right mouse to access pop-up menu, left click on Copy.
5. From the Horizontal tool bar, click Cancel twice to exit function.
6. Click on Paste. Move copied block to desired position. Finish.
To Next Page
Loading...