7
LETTERING
PRE-DIGITIZED FONTS
There are 48 pre-digitized fonts, including some Running Stitch fonts.
1. File: New.
2. Open Image dialog box: New.
3. New dialog box: OK.
4. Click on the Lettering icon from the Vertical toolbar.
5. In the Textbox, type SINGER; click OK.
6. From the Horizontal toolbar, click down-arrow next to the Font Name list.
7. Move the scroll bar to view the font list.
8. Click on a font, and text is automatically changed.
NOTE: There are suggested sizes and density settings for each pre-
digitized font, located in the ‘font preview’ box (just to the right of the pull-
down font list).
TRUE-TYPE FONTS
True-type fonts can be selected and automatically digitized in the lettering
program. The font is then automatically added to the built-in fonts list for future
reference.
1. Click the down-arrow next to the Font Name list.
2. Click on New TT Font (at the top of the list).
3. When the Font dialog box appears, select a font.
4. Click OK, and a Font Name box appears.
5. Click OK; the word SINGER is created in the new font; in addition, the
entire alphabet of the new font is built and automatically placed into the
Font List for future use.
To Next Page
Loading...