Singer Quantum XL-6000 - Page 17

Quantum
®
XL-6000
Auto Thread Exchanger
™
in Regular Sewing Mode
- 14 -
3. Stage Left Thread through Mast and through Exchanger Thread Guide A…
4. Stage Thread into Automatic Threading Mechanism
4. Automatically Thread Left Spool A and Stage Right Spool B…
Thread the
mast as
illustrated
This Specific
Thread Guide
must be used.
Failure to use
will cause
failure when
rewinding.
S
p
ool A
S
p
ool B
This step is vital to the success of the Auto
Thread Exchanger
™
. Hold the thread
tightly in your right hand as shown and
guide the thread with your left hand. Be
sure you pull the thread into the holding
pinch plate of the threading mechanism
before cutting the thread
. You will
actually feel a light “snap” and may hear
a slight “click” when the thread is
properly engaged in the Threading Pinch
Plate.
Touch Automatic Threading Key
Touch Automatic Threading Pictogram to
thread Left Spool A
Stage Right Spool B through Mast Guide and into
Automatic Threading Mechanism holding pinch plate
Upon completion of sewing with Left Thread
A, touch pictogram to rewind left spool
Thread right
thread B
Rewind right
thread B