Singer Quantum XL-6000 - Editing Lettering

Quantum
®
XL-6000
Combination Embroidery
- 33 -
3. Spell out by touching the word ‘Singer’ (one letter at a time) using upper
and lower case letters.
4. Touch the Pictogram to Enter.
EDITING LETTERING
1. Touch the Letter-sizing Pictogram in the Editing column.
Note: Text can be easily increased or
decreased in size by increments of 5mm.
When using the minus ( - ) or plus ( + )
pictogram (located on upper screen,
(above sizing pictograms), text size can
be changed in increments of 1mm from
7mm ~ 60mm.
2. The Pictogram (below the size pictograms) spaces letters
closer together or farther apart. Press the minus (-) pictogram two times.
Note how the letters change position on screen.
3. Increase the size of the letters to 32mm.
4. Touch the Grid Pictogram. The Grid is specially helpful when
positioning several lines of text.
5. Return to the Edit screen with the Pictogram.
6. Touch the
Pictogram.
7. Move the word ‘Singer’ to the upper area of the screen, above the flower.