Singer Quantum XL-6000 - Buttonholes

Quantum
®
XL-6000
Large and Small Decorative Patterns
- 20 -
Small Decorative Stitches
Select Folder 7 – (Purple screen)
Exercise #1 – How To Elongate A Stitch
1. Touch and hold the Trash Can Pictogram, to delete all patterns from the
screen.
2. Touch the ABC Pictogram in the lower right of the LCD screen.
3. Select the Crescent Stitch, Folder 7, Row 1, Stitch 1.
4. Select the Crescent Stitch again.
5. Touch the 1X Pictogram until it reads “2X”.
6. Touch the Crescent Stitch, and then touch 1X Pictogram until it reads
“3X”.
7. Touch the Crescent Stitch, and then touch 1X icon until it reads “4X”.
8. Touch the Crescent Stitch, and then touch 1X icon until it reads “5X”.
9. Touch the Crescent Stitch, and then touch 1X icon until it reads 10X.
10. Sew lengthwise along the fabric.
*Design is elongated without losing density.
Helpful Note: The density may be fine tuned with use of the Length Control.
Length Control and Thread Tension are available on a “pop-up” screen accessed
by touching the Key.
It is mathematicall
y
possible to modif
y
each stitch pattern in Folder 7 a total of
120 different ways, including making every other pattern an alternatin
g
color.
For two color sewin
g
, thread the machine with alternate color threads on the top
and in the bobbin, select the desired pattern, modify it as desired, touch the 2-
color sewing pictogram and sew. Have fun!