Singer Quantum XL-6000 - Page 38

Quantum
®
XL-6000
Combination Embroidery
- 35 -
21. Touch the Pictogram to Enter.
22. The word is highlighted, so it may now be edited. Touch the Letter-sizing
Pictogram and change the size to 18mm.
23. Touch the ‘minus’ Pictogram (just below the size
pictograms) 2 times, to bring the letters closer together.
24. Touch the Pictogram to go back to the Edit screen.
25. Touch the
Pictogram; then position “XL-6000” into place,
just below the word “Quantum”.
26. Touch Pictogram to return to Edit screen.
DELETING, ADDING and/or EDITING SELECTED DESIGN
Once they are selected, the design elements display across the top area of the
screen. There are 2 “eyeglasses” Pictograms, located near the bottom of the
screen: one with a left-arrow and one with a right-arrow. The “eyeglass”
Pictograms are used to move the orange-colored vertical cursor back and forth
through the display area on screen. The cursor is placed (in the upper screen
area) just to the right of the particular design element that is to be edited,
added or deleted.
1. To Delete a design element, place the cursor just to the right of the
element to be deleted. Then, touch the pictogram to delete the
design.
2. To Add a design element, place the cursor in the place where the
design is to be introduced. Touch the Pictogram, and then select a
new design. It will automatically be placed in the designated area.