Singer SC220 - Drawing Up Bobbin Thread

KNOWING YOUR SEWING MACHINE
9
DRAWING UP BOBBIN THREAD
1. Raise the presser foot lifter.
2. Holding needle thread loosely with your left hand, turn hand
wheel toward you with your right hand first lowering the
needle and continuing until the needle comes to its highest
position.
NOTE: A quick way to pick up the bobbin thread is,
with straight stitch selected, touch and release
the reverse button.
Your machine will perform one down-up cycle
and stop with the needle up.
Always stopping with the needle “fully up” is one
of the features of your computer sewing machine.
3. Lightly pull up the top thread, and pick up bobbin thread,
which will appear through the needle plate slot.
4. Pull both top and bobbin threads together toward the back of
the machine under the presser foot, leaving about 6"(15 cm)
clear.