STARTING TO SEW
31
IMPORTANT: When using a twin-needles, set
stitch width at 3.5 or less, or
otherwise needle may be broken.
A twin-needle produces two rows of parallel stitches
for pin tucks, double topstitching and decorative
sewing.
1. Insert the auxiliary spool pin. Place a spool on
each spool pin. Thread the two threads as one.
Draw one thread through each needle from front to
back.
2. Pick up bobbin thread as for single needle sewing.
Pull the three threads together under the presser
foot to the back of the machine, leaving about 6”
(15 cm) of thread.
NOTE: Needle threader cannot be used to
thread the twin needle.
STRAIGHT STITCH NEEDLE POSITION
The position of the needle when sewing straight stitch may be
adjusted to anyone of 13 different positions with the Stitch Width
Control as illustrated:
Twin needle mode
indicator
Stitch width adjustment button
To Next Page
Loading...
