© Mar. 2022 4-2 GTTZ10EJ Maintenance Manual
SERVICE AND GUIDELINES
For the purpose of receiving the safety-related
bulletins, it is important that Hunan Sinoboom
Intelligent Equipment Co., Ltd. has updated ownership
information for each machine. When performing each
annual machine inspection, notify Hunan Sinoboom
Intelligent Equipment Co., Ltd. of the current machine
ownership information.
PREVENTIVE MAINTENANCE
The preventive maintenance must be performed by a
qualified Sinoboom equipment mechanic.
Reference the Maintenance Inspection Report and
Maintenance Schedule in this manual for the inspection
items and intervals. Reference the Inspection
Procedures in appropriate areas of this manual to
perform the inspection and maintenance procedures.
Table 4-1
Type Frequency
Primary
Responsibility
Service
Qualification
Reference
Pre-
operation
Inspection
Prior to use each day;
or at each operator
change.
User or operator User or operator Operation Manual
Pre-delivery
Inspection
Prior to each sale,
lease or rental delivery.
Owner, dealer or
user
Qualified Sinoboom
mechanic
Maintenance Manual, Pre-
delivery Preparation Form,
and Maintenance Inspection
Report
Frequent
Inspection
In service for 3 months
or 150 hours,
whichever comes first;
or out of service for a
period of more than 3
months; or purchased
used.
Owner, dealer or
user
Qualified Sinoboom
mechanic
Maintenance Manual and
Maintenance Inspection
Report
Annual
Machine
Inspection
Annually, no later than
13 months from the
date of the prior annual
inspection.
Owner, dealer or
user
Factory-trained
service technician
Maintenance Manual, Pre-
delivery Preparation Form,
and Maintenance Inspection
Report
Preventive
Maintenance
At intervals as
specified in the
Maintenance Manual.
Owner, dealer or
user
Qualified Sinoboom
mechanic
Maintenance Manual,
Maintenance Inspection
Report, and Maintenance
Schedule
STORAGE
Please observe the following recommendations to
ensure the best performance of cylinders and avoid
corrosion due to an extended period of storage (indoor/
outdoor):
• The machine should be stored in stowed position
with all tires adjusted to keep aligned.
• Fully raise and lower the scissor and steer left and
right the wheels twice a week to lubricate the
cylinders.
MAINTENANCE AND
SERVICING PRECAUTIONS
GENERAL
This section assists you in the use and application of
the maintenance and servicing procedures contained in
this manual.
SAFETY AND WORKMANSHIP
Before servicing the machine, take the following
preventive measures:
To Next Page
Loading...
