SINTERIT Lisa Pro - Specification

Sinterit LISA PRO User Manual | 16
B. SPECIFICATION
GENERAL
Technology SLS
Laser system IR Laser Diode 5 [W] ; λ =808 [nm]
Dimensions 690 x 500 x 880 [mm] (27.1 x 19.7 x 34.6 [in])
Weight 90.0 [kg] (198 [lbs])
PRINT VOLUME
Max size of print diagonally
1
PA - 301 [mm] (11.8 [in])
TPU / TPE - 313 [mm] (12.3 [in])
High accuracy max print volume
PA - 110 x 160 x 230 [mm] (4.3 x 6.3 x 9 [in])
TPU / TPE - 110 x 160 x 245 [mm] (4.3 x 6.3 x 9.6 [in])
PRINTER PARAMETERS
Size of Print Bed 150 x 200 x 260 [mm] (5.9 x 7.9 x 10.2 [in])
XY accuracy from 0.05 [mm] (0.002 [in])
The layer height Z (min - max) 0.075 - 0.175 [mm] (0.003 - 0.007 [in])
PRINT FEATURES
Min. wall thickness from 0.4 [mm] (0.015 [in])
Min. detail size from 0.1 [mm] (0.004 [in])
Hole Diameter from 0.5 [mm] (0.020 [in])
Moving Part Clearance from 0.2 [mm] (0.008 [in])
ADDITIONAL PRINTER FEATURES
Nitrogen chamber Built-in
Coupling installed in Lisa Pro Pneumatic quick-coupling Male Plug Nipple DN7.2
Average Nitrogen consumption 0.48-0.54 [m³/hour]
SOFTWARE
Software² Sinterit Studio 2019 Open
Supported le types STL, OBJ, 3DS, FBX, DAE, 3MF
OS compatibility Microsoft Windows