SINTERIT Lisa Pro - Page 28

Sinterit LISA PRO User Manual | 28
Insert the folded IO Box into the Print Chamber... ...and then gently slide it apart.
16. Using the Powder Funnel, ll the Feed Bed with powder.
The required volume of the powder is given in the report in
Sinterit Studio.
Pour the powder into the Feed Bed.
Use the Powder Funnel.
17. Gently compress the powder in the Feed Bed. We
recommend using the Trowel - its size corresponds to the
size of the Feed Bed.
18. Take out the IO Box from Print Chamber. Be careful not to
damage the Lid components.
Compress the powder in the Feed Bed.
Use the Trowel.