To Next Page

To Previous Page

3.3 Measuring the reel

Place the magnet of the Reel

Diameter Tape™ on a blade at the left end

of the reel.

Make sure that the magnet is in far

enough so that it will not touch the Reel

Diameter Tape™ when you wrap it

around.

INFO-The position of the magnet is not

important because you are measuring from

and to the zero point on the Reel Diameter

Tape™.

Keep tension on the Reel Diameter

Tape™ as you rotate the reel and wrap

the Reel Diameter Tape™ around the reel.

Questions and Answers:

Need help?

Do you have a question about the SIP Peerless 7000 and is the answer not in the manual?

SIP Peerless 7000 Specifications

General