If the difference is greater
than .002-.003 you should adjust the head
by loosening the bolts.
Rotate the head until the shaft varies
less than 0.003. Re-tighten the bolts,
taking care not to move the head.
6.3 Dressing the grinding stone
Disengage the grinding head.
DANGER-Wear face shield! Stay clear of
stone when starting machine!
Mount the diamond dresser on to the
magnetic base.
Clamp the magnetic base on to one of
the reel support rails. Position the
diamond dresser tip on the top of the
stone.
To Next Page
Loading...
General