EasyManua.ls Logo

SIP Peerless 7000 - Adjusting the Spin Motor Belt

Default Icon
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If the difference is greater than .010,
you should realign the fence.
Loosen the left locking knob.
Loosen the rear jam nut on the left
rear of the fence.
Adjust the socket head bolt until the
both sides are within .010 with the locking
knob and jam nut tight. It may take several
tries in order to compensate for tightening
the locking knob and jam nuts.
6.7 Adjusting the spin motor belt
Remove the belt guard.
69