Thank you for selecting the Simplex•Ideal•Peerless Reel Mower Grinder. The Peerless 7000 Grinder is
designed and built from top quality materials and components by people who care, and it will give you
decades of service.
The following are general safety guidelines. Please read and understand these guidelines before
proceeding. As is the case with most machinery, failure to operate it in a safe manner may result in damage,
injury or loss of life. Please be careful.
1. Always close shield or wear safety glasses and face shield when grinding!
2. Keep all guards in place and functioning.
3. Do not wear any loose clothing or jewelry which may get caught in the machinery. Secure long
hair.
4. Keep your work area clean and organized.
5. Set up the work properly, using the correct tools and fixtures. Ensure that work is securely
clamped.
6. Use the wrenches provided when changing the grinding stone and always ensure that the nut is
tight.
7. Do not overtightening as that may damage the grinding stone.
8. Always replace damaged grinding stone.
9. Never leave grinder running while unattended.
In addition to the safety guidelines just listed, there are safety notices through out this manual which are
denoted as follows:
INFO-Running the spin motor too fast may damage the indexer.
INFO-Running the spin motor too fast may
damage the indexer.
A Warning Notice indicates a situation which could cause severe damage, serious injury or death.
WARNING-Always close shield or wear
safety glasses and face shield when
grinding.
A Danger Notice indicates a very dangerous situation which if continued will cause severe damage,
serious injury or death.
DANGER-Do not overtighten the nut as it
will cause the grinding stone to explode!
Again, make sure that you read and understand these warnings before proceeding because failure to
operate any machinery in a safe manner may result in damage, injury or loss of life.
To Next Page
Loading...
General