To Next Page

To Previous Page

Remove the quick change hub if one

is mounted.

Mount the dial indicator and magnetic

base so that the tip of the dial indicator

rests on top of the grinding stone shaft.

Move the grinding head back and forth

and read the difference on the dial

indicator.

If the difference is greater

than .002-.003 you should adjust the head

by loosening the bolts at the base of the

bearing support.

Questions and Answers:

Need help?

Do you have a question about the SIP Peerless 7000 and is the answer not in the manual?

SIP Peerless 7000 Specifications

General