Sitecom DC-227 - DHCP Relay Configuration

Please check www.sitecom.com for up to date drivers & utilities, manuals and support
23
6.2.2 DHCP Relay Configuration
Some ISPs perform the DHCP server function for their customers’ home/small office network.
In this case, you can configure this device to act as a DHCP relay agent. When a host on your
network requests Internet access, the device contacts your ISP to obtain the IP configuration,
and then forward that information to the host.
Apply Changes
Click to save the setting to the configuration. New parameters will take effect after
saving into flash memory and rebooting the system.
Field Description
DHCP Server
Address
Specify the IP address of your ISP’s DHCP server. Requests for IP
information from your LAN will
be passed to the default gateway, which
should route the request appropriately.