Sitecom DC-227 - 8 Advanced Settings; Bridging

Sitecom ADSL2+ Modem DC-227
40
8 Advanced Settings
8.1 Bridging
You can enable/disable Spanning Tree Protocol and set MAC address aging time in this
page.
Field Description
Ageing Time Set the Ethernet address ageing
time, in seconds. After [Ageing Time]
seconds of not having seen a frame coming from a certain address, the
bridge will time out (delete) that address from Forwarding DataBase
(fdb).
802.1d Spanning
Tree
Enable/disable the spanning tree protocol
Apply Changes
Save this bridge configuration. New configuration will take effect after saving into flash
memory and rebooting the system.
Show MACs
List MAC address in forwarding table.