9.5 Commit and reboot
Whenever you use the Web configuration to change system settings, the changes are initially
placed in temporary storage. These changes will be lost if the device is reset or turn off. To
save your change for future use, you can use the commit function.
Commit and Reboot
Whenever you use the web console to change system settings, the changes are initially
placed in temporary storage. To save your changes for future use, you can use the
Commit/Reboot function. This function saves your changes from RAM to flash memory
and reboot the system.
IMPORTANT! Do not turn off your modem or press the Reset button while this procedure is
in progress.
To Next Page
Loading...
