Sitecom DC-227 - Page 30

Sitecom ADSL2+ Modem DC-227
30
Field Description
RIP Enable/disable RIP feature.
Field Description
Interface The name of the interface on which you want to enable RIP.
Receive Mode
Indicate the RIP version in which information must be passed to the DSL
device in order for it to be accepted into its routing table.
Send Mode Indicate the RIP version this interface will use when it sends its route
information to other devices.
Add
Add a RIP entry and the new RIP entry will be display in the table
Delete Selected Entry
Delete a selected RIP entry. The RIP entry can be selected on the Select column of the
RIP Config Table.
Apply Changes
Set new DHCP server configuration. New parameters will take effect after saving into
flash memory and rebooting the system.