WL-108 Wireless Network Modem/router 11M
27
Data - WEP Screen
WEP Data Encryption
WEP Data
Encryption
Select the option to match other Wireless Stations:
• Disabled - data is NOT encrypted before being transmitted.
• 64 Bit - data is encrypted, using the default key, before being
transmitted. You must enter at least the default key. For 64 Bit
Encryption, the key size is 5 chars (ASCII) or 10 chars in HEX
(0~9 and A~F).
• 128 Bit - data is encrypted, using the default key, before being
transmitted. You must enter at least the default key. For 128 Bit
Encryption, the key size is 13 chars (ASCII) or 26 chars in HEX
(0~9 and A~F).
Authenticati
on Type
Normally, this should be left at the default value of "Automatic". If
changed to "Open System" or "Shared Key", ensure that your Wireless
Stations use the same setting.
WEP Keys
• Key Input - Select "Hex" or "ASCII" depending on your input
method. (All keys are converted to Hex, ASCII input is only for
convenience.)
• Default Key - select the key you wish to be the default.
Transmitted data is ALWAYS encrypted using the Default Key; the
other Keys are for decryption only.
• Key Value - Enter the key value you wish to use. Other stations
must have the same key.
Passphrase
If desired, you can generate a key from a phrase, instead of entering
the key value directly. Enter the desired phrase, and click the
"Generate Keys" button.
To Next Page
Loading...