WL-108 Wireless Network Modem/router 11M
43
Connecting to the Virtual Servers
Once configured, anyone on the Internet can connect to your Virtual
Servers. They must use the Internet IP Address (the IP Address allocated
to you by your ISP).
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP,
rather than Dynamic. However, you can use the Dynamic DNS feature,
described in the following section, to allow users to connect to your Virtual
Servers using a URL, rather than an IP Address.
To Next Page
Loading...