WL-108 Wireless Network Modem/router 11M
56
Outgoing Rules
This screen is displayed when the "Add" on "Edit" button for Outgoing
Rules is clicked.
Data - Outbound Rules Screen
Outbound Services
Service
Select the desired Service or application to be covered by this rule. If
the desired service or application does not appear in the list, you must
define it using the Services menu.
Action
Select the desired action for packets covered by this rule:
• BLOCK always
• BLOCK by schedule, otherwise Allow
• ALLOW always
• ALLOW by schedule, otherwise Block
Note:
• Any outbound traffic which is not blocked by rules you create will be
allowed by the Default rule.
• ALLOW rules are only useful if the traffic is already covered by a
BLOCK rule. (That is, you wish to allow a subset of traffic which is
currently blocked by another rule.)
• To define the Schedule used in these selections, use the "Schedule"
screen.
LAN Users
Select the desired option to determine which PCs are covered by this
rule:
• Any - All PCs are covered by this rule.
• Single PC - Only the selected PC is covered by this rule.
If selected, you must select the PC.
PC - If using Single PC above, select the PC or Server on your LAN
which will be covered by this rule.
WAN Users
These settings determine which packets are covered by the rule, based
on their source (WAN) IP address. Select the desired option:
• Any - All IP addresses are covered by this rule.
• Address range - If this option is selected, you must enter the
"Start" and "Finish" fields.
• Single address - Enter the required address in the "Single/Start"
fields.
To Next Page
Loading...