SIYI HM30 - General

HM30 User Manual v1.3
38
2024 SIYI Technology Copyright
3.1 GENERAL
Basic functions of the HM30 system.
About Settings
Rec. No (Air Unit No.): Display the number of the currently bound air unit.
Bind: Start to bind the ground unit to an air unit.
RC Mode (RC): Display the current radio control signal input mode of the ground unit’s RC
port.
Datalink Mode (Datalink): Display the current datalink communication port of the HM30
system.
BAUD: The baud rate for the HM30 link.
AAT. BAUD: The baud rate for the communication between HM30 ground unit datalink