Name: SIYI MK15
Brand: SIYI
Rating: 5 (1 reviews)

To Next Page

To Previous Page

MK15 User Manual V1.4

If it is your first time adding a new connection in QGC, please do not check the option

“Automatically Connect on Start”. It can be checked later when you confirm that the

datalink is connected successfully.

4.4.2 Mission Planner

1. In “SIYI TX” app, go to “Datalink”, and choose “UDP” in “Connection”, “PIX / PX4

/ Ardupilot” in “Flight Controller”, and match the baud rate with the flight controller

TELEM port’s.

2. Enable the WiFi hotspot in remote controller Android system, connect the remote

controller with the Windows computer through WiFi.

3. Run Mission Planner, select the relevant port (UDPCl) and match the baud rate.

“Port” as “19856”. “Server addresses” as “192.168.144.12”. Then connect.

Questions and Answers:

Need help?

Do you have a question about the SIYI MK15 and is the answer not in the manual?

SIYI MK15 Specifications

General