MK15 User Manual V1.4
49
2023 SIYI Technology, All Rights Reserved
Joystick Deadzone: Configure the joystick deadzone value for smooth control based on your
habit.
3.3.1 Bind
Please follow the steps below to bind the ground unit to the air unit.
1. In “SIYI TX” application, go to “System” page, then touch “Bind - Start”.
2. Ground unit status indicator will turn to “Red Fast Blinking”. And in “Bind” menu,
it displays “Binding”.
3. Press and hold the binding button on the air unit for about two seconds, air unit
status indicator will turn to “Red Fast Blinking” as well.
4. Then wait for 5 to 10 seconds till both ground unit and air unit status indicators
have turned to “Solid Green”. Binding is done.
3.3.2 Multiple Air Unit
The multiple air unit function supports saving multiple bounded air unit and
corresponding channel setting data on the same remote control. In this way, after
each air unit and remote controller are bound for the first time, users no longer need
to re-bind to switch between them.
To Next Page
Loading...
Need help?
General