MK15 User Manual V1.4
87
2023 SIYI Technology, All Rights Reserved
4.5 Communication with Windows GCS through Upgrade Port
4.5.1 QGroundControl
1. Connect the remote controller’s upgrade port to the Windows computer, the
Windows system will generate a communication port for the remote controller.
2. In “SIYI TX” app, go to “Datalink”, and choose “Upgrade Port (MK15) / Type-C
(MK32)” in “Connection”, “PIX / PX4 / Ardupilot” in “Flight Controller”, and match
the baud rate with the flight controller TELEM port’s.
3. Run QGroundControl, go to “Application Settings – Comm Links” and “Add” a
new connection. Name it as “USB-COM”. Connection “Type” as “Serial”. Match
the baud rate.
To Next Page
