Need help?Do you have a question about the SIYI MK15 and is the answer not in the manual?
General| Frequency | 2.4GHz |
|---|---|
| Channels | 16 |
| Operating System | Android |
| Operating Frequency | 2.4 GHz |
| Low-Voltage Alarm | Yes |
| Operating Voltage | 7.4V |
| Video Transmission | 1080p |
| Charging Port | USB Type-C |
| Ports | HDMI, USB, Micro SD |
| Transmission Range | 8-15 km (depending on environment) |
| Endurance | 6-8 hours |
| Compatibility | SIYI cameras and drones |
Details safety guidelines for operating the MK15 ground station, including user responsibilities and prohibitions.
Details the 15 KM Wireless Digital Image Transmission, Dual-Channel Full HD Video Stream, and 5.5-Inch High-Definition Monitor.
Highlights the Qualcomm 8-core CPU, 1080p video decoding, and efficient ground control software operation.
Explains dual operator function and remote-control relay for ultra-long-distance missions.
Provides technical details for overall system, remote controller, and air unit, covering range, channels, and dimensions.
Explains the meaning of different LED colors and blinking patterns for the transmitter status.
Explains the meaning of different LED colors and blinking patterns for the air unit status.
Instructions for optimizing communication range and video fluency with antenna and wireless mode configurations.
Lists necessary information and checks for troubleshooting unexpected communication range issues.
Explains how to configure channel settings like End Point, Middle Point, Reverse, and Mapping.
Explains how to check device ID, switch datalink connection, and configure baud rate.
Covers system functions like Bind, Multiple Air Unit, Frequency Self-Adapting, and mode settings.
Configures the failsafe function to prevent aircraft crash during lost communication.
Helps calibrate joysticks' middle, maximum, and minimum positions for accurate control.
Helps calibrate dials' middle, maximum, and minimum positions for accurate control.
Provides troubleshooting steps for datalink connection issues between the remote controller and GCS.
Provides steps to investigate possible reasons for the remote controller failing to display an image.
Details the process of upgrading remote controller and air unit firmware using SIYI Assistant.
To Next Page