MK15 User Manual V1.4
109
2023 SIYI Technology, All Rights Reserved
Synchronize Zoom: Enable / disable simultaneous zooming of the thermal camera and the
zoom camera.
Main / Sub Stream: Configure the main stream and the sub stream separately for their
camera source and parameters.
Image Mode: Select the video stream’s image type and camera source. Single image or split
image. Zoom camera, wide angle camera, or thermal imaging camera.
Stream Resolution: Decide to switch the output resolution of the current video stream or not
according to camera source. Max output resolution is Ultra HD (1080p).
Record Resolution: Decide to switch the recording resolution or not according to camera
source. Max record resolution is 4K.
Gimbal Working Mode: Switch gimbal working mode among Lock Mode, Follow Mode,
and FPV Mode.
⚫ Lock Mode: Horizontally, gimbal does not follow when aircraft rotates.
⚫ Follow Mode: Horizontally, gimbal follows when aircraft rotates.
⚫ FPV Mode: Gimbal rotates simultaneously as aircraft rolls to get FPV view, and output
images with enhanced stability.
Camera Firmware Version: Display current camera firmware version.
Gimbal Firmware Version: Display current gimbal firmware version.
Zoom Firmware Version: Display current gimbal firmware version.
To Next Page
Loading...
Need help?
General