QuickCollect 2 - 7
User Manual
Communication LED – (Green, Red)
Off – Indicates the sensor is powered off.
Green, blinking – Indicates the sensor is powered on and not connected to an
application.
Green, solid – Indicates the sensor is powered on and connected to an
application.
Toggling between green and red – Firmware update in progress.
All-purpose check LED – (Green, Red, Amber)
Red, solid – Indicates an error condition: factory state, no serial number,
uncalibrated.
Red, fast blinking – Indicates a critical error.
To Next Page
Loading...
Need help?
General
