QuickCollect 2 - 1
User Manual
2
SKF QuickCollect Sensor
SKF QuickCollect Sensor System Overview
The SKF QuickCollect sensor is part of the SKF Enlight Collect system, which also
includes the QuickCollect app and the DataCollect app. This system is used by service,
reliability, operations or maintenance personnel as part of a walk-around data collection
program. With one wireless vibration and temperature sensor that can be connected to
tablets, smart phones and smart watches, the user can monitor hundreds of assets per
day and thousands of assets per month. The data can be analysed on the spot in real
time or sent to the cloud for analysis.
Figure 2 - 1.
On the job with an Enlight QuickCollect system.
In brief, a typical operation would include the following steps:
Carry the QuickCollect sensor and smart device out to the machine with rotating
parts’ (such as a pump or motor).
Mount the sensor on the bearing housing using the magnet mount.
Initiate the sensor measurement wirelessly (using Bluetooth
®
Low Energy, or BLE)
using either the SKF QuickCollect or DataCollect app running on a smart device.
After taking the measurement, remove the sensor and proceed to the next machine
or measurement location to continue taking measurements.
When complete, return the sensor to its charging power supply via the cable.
To Next Page
Loading...
Need help?
General
